networks.name=Network
networks.names=Networks

addressView.name=Addressing
keysView.name=Keys
interfaceView.name=Interface
advancedView.name=Advanced
externalView.name=External
upView.name=Up Scripts
downView.name=Down Scripts
forwardingView.name=Forwarding
dnsView.name=DNS
routesView.name=Routes

name.name=Network Name
name.desc=The name of this Network. On a Linux server, this is the name that will be given to the physical VPN network interface. \
	This name will also be displayed in the user interface in various places.

running.name=Status

poolType.name=Address Pool Type
poolType.desc=Your preference for how to express the range of IP addresses devices on this network will be allocated from.
poolType.CIDR.name=CIDR
poolType.RANGE.name=Range

cidr.name=CIDR
cidr.desc=The CIDR of this network. Supports IPv4 or IPv6 CIDR format.

nodeAgent.name=Node
nodeAgent.desc=If the LAN this interface is bound to is to be physically located elsewhere, e.g. when managed by a cloud server, \
	choose the <a href="vpnNodeAgents">Node Agent</a> where the interface is physically located, otherwise leave blank to if the endpoint \
	for all VPN clients will be this server.

rangeStart.name=IP Range Start
rangeStart.desc=The first in the range device addresses will be allocated from.

rangeEnd.name=IP Range End
rangeEnd.desc=The last in the range device addresses will be allocated from.

iface.name=Physical Interface
iface.desc=The physical network interface this network is associated with. This is generated from the <em>Network Name</em> \
	is automatically allocated, and may not be changed.  

bindPort.name=Listening Port
bindPort.desc=The port number which the VPN service for this Network will listen on. This is \
	allocated automatically, and may not be changed.

enabled.name=Network Enabled
enabled.desc=This Network will not be active until it has been enabled.

upnp.name=UPnP
upnp.desc=Automatically configure a port forward from a local router using the UPnP protocol. Not suitable for use on corporate networks, instead a port forward should be configured manually.

externalAddress.name=External Address
externalAddress.desc=If you are port forwarding from a different external address, then set that here. This is used in generated configuration files that are deployed to clients. If left as the default blank, then the system will attempt to resolve the external address using a call to Jadaptive's WhatsMyIP service.

externalPort.name=External Port
externalPort.desc=If you are port forwarding from a different external port, then set that here. This is used in generated configuration files that are deployed to clients. If left as the default of 0, then the local port number of the interface is used.

additionalRoutes.name=Routes
additionalRoutes.desc=These routes will be published to ALL clients. If you want specific routes per client, edit or create a Client Configuration resource.

publicKey.name=Public Key
publicKey.desc=The server's public key. 

systemDns.name=Use System DNS
systemDns.desc=Allocate the DNS servers configured on this system to the client.

dnsAddresses.name=DNS Addresses
dnsAddresses.desc=The IP addresses of any DNS servers that need to be allocated to the client.

domainSearch.name=Domain Search
domainSearch.desc=The domain search list to allocate to the client.

privateKey.name=Private Key
privateKey.desc=The server's private key.

endpoint.name=Endpoint
activity.name=Activity
pool.name=Addresses
node.name=Node
node.local=Local
node.offline=Node Offline

mtu.name=Server MTU
mtu.desc=The MTU to use on the server side peer. When left at the default value of zero, the MTU is \
	automatically determined from the endpoint addresses or the system default route, which is \
	usually a sane choice. However, to manually specify an MTU to override this automatic discovery, \
	this value may be specified explicitly.

create.name=Create Network

fwMark.name=Packet Marker
fwMark.desc=On supported platforms, all packets on this interface will be marked with this tag, allowing complex firewall and routing rules. A value of zero disables the marker.

preUp.name=Pre-Up
preUp.desc=Script executed before the interface is bought up. The special string `%i' is expanded to INTERFACE.

postUp.name=Post-Up
postUp.desc=Script executed after the interface is bought up. The special string `%i' is expanded to INTERFACE.

preDown.name=Pre-Down
preDown.desc=Script executed before the interface is bought down. The special string `%i' is expanded to INTERFACE.

postDown.name=Post-Down
postDown.desc=Script executed after the interface is bought down. The special string `%i' is expanded to INTERFACE.

natType.name=NAT
natType.desc=The NAT, or Network Address Translation mode to use. This is used to forward packets without the need \
	for external routes, but does come with some compromises.

natInterfaces.name=NAT Interfaces
natInterfaces.desc=The interfaces on this server to NAT this Network's client traffic. If you do not select any interfaces and NAT is enabled, then all suitable interfaces will be used.

presharedKey.name=Pre-shared Key
presharedKey.desc=Additional key that is known to all peers, and is mixed in to user keys to provide additional protection against \
	attack. While not strictly required, pre-shared keys are designed as a <em>future</em> defence against quantum computers.

liveThroughputOutGauge.name=Outbound
liveThroughputInGauge.name=Inbound

throughputTab.title=Throughput Tab
throughputTab.text=This tab shows a summary of the network traffic passing through this \
	VPN server.
	
networks.help.text=This page shows all of the defined <em>Networks</em>. Each network \
	is assigned a pool, from which new devices wishing to access this network are assigned \
	addresses. 
networks.help.text.1=If this is a <em>Cloud</em> server, you will need to install a <a href="vpnNodeAgents">Nodal Agent</a> \
	on your LAN before you can create the Network Interface..
networks.help.text.2=For simple networks, you are unlikely to need more than one \
	interface.
networks.help.text.3=Several different types of  <a href="networkClients">Clients</a> are supported. \
  	Each has different behaviour, may have different configuration and routes, and be assigned to specific \
  	users or roles. See the help for Clients for more information.
  	
alert.interfaceDown.title=Interfaces Are Down
alert.interfaceDown.content={0} of your VPN interface(s) are down. You can try and start them now.
action.interfaceDown.start=Start

networkStarted=Network Started
networkStopped=Network Stopped

networks.updated=Network Updated
networks.created=Network Created 
networks.deleted=Network Deleted  

alert.downloadNodalAgent.title=Nodal Agent
alert.downloadNodalAgent.content=The Nodal Agent is installed on a host on your LAN, and silently and \
	securely provides the communications link with Nodal Cloud services. 
	
alert.downloadVpnClient.title=Nodal VPN Client
alert.downloadVpnClient.content=Our companion app, to be distributed to  users. You'll need to have this installed \
	to make the most out of Nodal VPN. 
	
action.download=Download

success.networkStarted=Network <strong>{0}</strong> started.
success.networkStopped=Network <strong>{0}</strong> stopped.
success.keysRegenerated=Network private key regenerated, all devices on this networks have been \
	de-authorized, and must re-authorize to reconnect.

regeneratePrivateKey.name=Regenerate Private Key

regeneratePrivateKey.confirm=Are you sure you wish to regenerate the private key for <strong>{0}</strong>? \
	This will result in all devices on this network requiring re-authorizing.
	
totalTrafficChart.name=Total Traffic
throughputChart.name=Total Throughput
activePeersChart.name=Active Concurrent Connections
 
resolution.MINUTE=Minute
resolution.HOUR=Hour
resolution.DAY=Days

graph.days.1=1 Day
graph.days.7=1 Week
graph.days.14=2 Weeks
graph.days.30=1 Month
graph.days.60=2 Months
graph.days.90=3 Months
graph.days.365=1 Year
graph.interfaces.summary=Summarise
graph.interfaces.all=All

networks.noResults=There are no networks currently configured. If this is a cloud server, a \
	network may not be created without an active <a href="/app/ui/search/vpnNodeAgents">Node Agent</a>.

throughput.iface=Network
throughput.tenant=Tenant
throughput.speed=Speed
throughput.total=Total

setupTasks.noNetworks.title=Create A Network
setupTasks.noNetworks.content=Before your users can connect, you must create a <em>Network</em>. \
							Each Network has a defined range of addresses which are allocated to \
							your users when they connect.  
setupTasks.noNetworks.networks=Create Network

peerInactivityJob.name=Device Inactivity Check
peerInactivityJob.desc=Checks for any devices that are expired. Not all devices do expire, and those \
	that do may have different expiry times

deauthorizePeerJob.name=De-authorize Device
deauthorizePeerJob.desc=De-authorizes devices that may expire.
 
	